PWM to Voltage Converter Module 0-5V / 0-10V

Product Code:: 2018-1-739
Availability:: 10

10.00 ₺

With Bank Transfer %5 off 9.50 ₺

Ex Tax: 8.33 ₺

Same-Day Shipping For orders placed by 15:00
Free Shipping On orders over 3000 TL
Easy Returns 14-day right of return
Secure Payment 256-bit SSL protected

PWM to Voltage Converter Module 0-5V / 0-10V

The LC-LM358-PWM2V module converts PWM digital signals into 0-10 V analog signals. It can be used as a signal interface switch for PLC or other industrial control boards.

Technical Specifications

Module Code	LC-LM358-PWM2V
Function	Converts PWM digital signals into 0-10 V analog signals
Application	Signal interface switching for PLC or industrial control boards
Output Voltage Adjustment	Adjusted by setting the PWM duty cycle
Technology	Embedded MCU
Operating Voltage	DC 12 V-30 V (>100 mA)
PWM Receiver Frequency	1 kHz-3 kHz
PWM Signal Input Level Selection	Selected via short circuit (jumper)
PWM Signal Input Level (Jumper 5V)	4.5 V to 10 V peak, suitable for normal controllers or 5 V MCU
PWM Signal Input Level (Jumper 24V)	12 V to 24 V peak, suitable for normal PLC controllers
Conversion Range	0% - 100% PWM input, 0-10 V output
Permissible Error	5%
VCC	DC 12 V-30 V
GND	Ground
PWM	Positive terminal of the PWM input signal
GND (input)	Input signal negative
VOUT	Output voltage 0-10 V
GND (output)	Output voltage ground
Output at Power-On	When there is no input signal, the output is 0 V
Calibration Method	Apply a PWM signal with 50% duty cycle (frequency 1 kHz-3 kHz), adjust the potentiometer so that the multimeter reads 5.00 V between VOUT and GND.
On Frequency Change	Calibration may be required when the frequency changes.
Accuracy Adjustment	Can be controlled by adjusting the potentiometer.